This best-selling kit contains the essential products needed for spa start-up and maintenance including sanitizer, shock, sequestering agent, defoamer, test strips, clarifier and balancers. The kit also contains the Simple Spa Care® video and Spa Care Guide outlining the NEW Simple Spa Care Program.  

Tips:
Includes scoop for accurate product measuring.

Contents:

• Bright & Clear
  Safe for Ozone - Does not cause build-up!
• Enzyme
• Foam Down
• Spa Up
• Spa Down
• Metal Gon
• Defender
• Renew
• Sodium Bromide
• Fast Gloss
• Spa & Hot Tub Test Strips
• Brom Tabs
• Simple Spa Care® Instructional DVD
• Cover Wipes
• EsScents Fragrance Sample

Easy-to-use cartridge containing natural purifying minerals known to help control bacteria and prevent algae.  

Features:

• Simplifies water care by reducing sanitizer demand
• Improves filter efficiency
• Formulated for use with bromine, chlorine, ozone and non-chlorine shock
• Fits most filters
• Lasts up to four months in spas up to 1000 gallons

Applications:
Installation:
1. Insert into filter cartridge, in filter well or in skimmer.
2. Lower your chlorine or bromine level to only 0.5 ppm.
3. Replace every 4 months when draining and refilling spa.

 

Tips:
Always drain and refill spa and replace cartridge every 3 to 4 months. Leisure Time recommends cleaning the spa filter with Instant Cartridge Clean instant spray-on cleaner or Filter Clean deep-cleaning soaking formula.

Compatible With:
Chlorine, bromine, ozone and non-chlorine shock.

Renew is a non-chlorine shock treatment. This fast-dissolving granular rids spa water of residual soaps, deodorants, natural oils and organic materials that can build up in spa water.

When Renew is added to the spa water, it reacts with the bromide and forms a bromine solution to destroy any microorganisms left behind by the bather. Part of the Reserve & Renew® Chlorine-Free Sanitizing System.  

Features:

• Quickly dissolves in water to rid spa water of oils and residue.
• Eliminates organic materials that cause odors, skin and eye irritation.
• Use spa minutes after application.
• pH buffered so it does not effect pH level.
• Buffer potassium monopersulfate compound
• Formulated with DuPont™ Oxone®

Applications:
After Each Use:
1. Turn on filtration system.
2. For each 250 gallons of water, add 2 ounces directly into spa water.
3. Run filtration system for 15 minutes with cover off.
4. Repeat process once a week to help maintain clear, odor-free water.

 

Tips:
The time to add Renew is after using the spa. Simply add the required dose, put the cover in place, and the water will be fresh, clean and ready for the next bather.

Compatible With:
Chlorine, bromine, ozone and mineral purifications systems, as well as part of the Reserve & Renew® System.

Gently increases pH with "no mix" liquid. Allows for a more comfortable control of the adjustment of pH.  

Features:

• Raises pH and total alkalinity
• Easier to use than granular balancers
• Pre-mixed - just add to spa

Applications:
As Needed:
1. Turn ON air blower or filter system.
2. Add 1 oz. directly into spa.
3. Retest water after 30 minutes.
4. Follow steps 1-3 until pH and total alkalinity are in the range of 7.2-7.8 and 80-120 ppm respectively.

 

Tips:
Add small quantities at a time allowing the water to completely mix and come into equilibrium before retesting. Large dose at once may drive the pH too high.
Easier to stay within the pH range when using liquid.
Lock in pH between refills with pH Balance or pH Balance Plus.

Compatible With:
Chlorine, bromine and biguanide sanitizers.

Lowers critical pH levels easily with no mixing or mess.  

Features:

• Lowers pH and total alkalinity
• Easier to use than granular balancers
• Pre-mixed - just pour into spa

Applications:
As Needed:
1. Turn ON air blower or filter system.
2. Add 1 oz. directly into spa.
3. Retest water after 30 minutes.
4. Follow steps 1-3 until pH and total alkalinity are in the range of 7.2-7.8 and 80-120 ppm respectively.

 

Tips:
Do NOT add more than 1 oz. at a time. Always wait 30 minutes between dosages and test water before each addition of Liquid Spa Down.
Lock in pH between refills with pH Balance or pH Balance Plus.

Compatible With:
Bromine, chlorine and biguanide sanitizers.

Critical to pH control, this granular formula effectively raises alkalinity levels which might otherwise cause equipment corrosion. 

Features:

• Raises total alkalinity
• Prevents pH bounce

Applications:
Start-Up:
1. Add 1 oz (2 tbsp) to spa water.
2. Allow water to circulate for 30 minutes.
3. Retest water and repeat Steps 1 and 2 until the desired level is reached.


 

Tips:
For best results, dissolve granular products first by adding to a small, plastic pail filled with water.

Compatible With:
Chlorine, bromine, ozone and biguanide sanitizers.

Check sanitizer level, calcium hardness, alkalinity and pH withone easy-to-read test strip 

Applications:
Weekly:
Dip strip in water one time. Compare test results to chart on back of the bottle.

 

Sizes:
50 strips
 

Compatible With:
Leisure Time Free sanitizing system, biguanide spas and hot tubs

Concentrated formula deep cleans filter to remove dirt, oil, grease and scale. 

Features:

• Use for cartridge, sand or DE filters
• Removes oil, grease, dirt and soap
• Works overnight

Applications:
3-Month Cleaning:
1. Remove grids or cartridges from filter.
2. In a clean, plastic pail, bucket or trash can that contains 8 gallons of water, add contents of FILTER CLEAN. (This is enough solution to clean 110 square feet of filter area.)
3. Place cartridge or grids upright in solution.
4. Soak for a minimum of 3 hours. For maximum effectiveness, soak overnight.
5. Remove filter from solution. Hose off filter with high pressure nozzle and replace.

 

Tips:
Filters should be cleaned every three months or as needed.
For maximum benefit, allow catridge to dry before reinstalling.

Compatible With:
Chlorine, bromine and biguanide sanitizers.

Raises water hardness level while preventing foaming and equipment corrosion. 

Features:

• Increases water hardness
• Helps prevent corrosion

Applications:
As Needed:
One ounce raises the calcium hardness 7 ppm in 500 gallons of water.
1. Determine amount of product to be added. The ideal hardness level is 150-400 ppm.
2. Turn jets ON to circulate spa water.
3. Pour required amount into the water.
4. Run filter for 1 to 2 hours.
5. Retest water to ensure proper level.
6. Repeat steps 1-5 until proper level is obtained.

 

Tips:
Use Leisure Time Spa & Hot Tub Test Strips to determine hardness level. Water low in calcium will etch plaster and corrode equipment.

Compatible With:
Chlorine, bromine, ozone and biguanide sanitizers.

Specifically formulated for spas, this concentrated granular chlorine effectively sanitizes and disinfects hot water.  

Features:

• Maintains clean, clear, sanitized water
• EPA approved

Applications:
Start-Up:
See product label for complete application instructions.

 

Tips:
Shocking the spa after each use will destroy organic bather waste.

This specially formulated mix of bromide salts becomes a powerful bromine sanitizer when combined with Leisure Time Renew. Not only is this two-part system completely chlorine-free, but there are no unpleasant side effects typically associated with other non-chlorine sanitizing systems. Use Reserve as part of the Reserve & Renew® Sanitizing System.  

Features:

• A bromide solution for use with Leisure Time's Renew as part of a system for disinfection of water in spas
• 100% bromine sanitizer
• Easy-to-use liquid

Applications:
Weekly:
1. Treat the spa with Metal Gon according to its label directions.
2. Add Reserve (4 oz./250 gallons of spa water) directly into the spa while circulating the water to assure rapid and thorough distribution.
3. Add Renew to activate the bromide bank for a bromine residual.


 

Tips:
Heavy usage may result in depletion of bromine and require additional dosages of Renew and/or Reserve to maintain the desired bromine residual. Change water monthly or as needed to maintain water quality.

Renew is a non-chlorine shock treatment. This fast-dissolving granular rids spa water of residual soaps, deodorants, natural oils and organic materials that can build up in spa water.

When Renew is added to the spa water, it reacts with the bromide and forms a bromine solution to destroy any microorganisms left behind by the bather. Part of the Reserve & Renew® Chlorine-Free Sanitizing System.  

Features:

• Quickly dissolves in water to rid spa water of oils and residue.
• Eliminates organic materials that cause odors, skin and eye irritation.
• Use spa minutes after application.
• pH buffered so it does not effect pH level.
• Buffer potassium monopersulfate compound
• Formulated with DuPont™ Oxone®

Applications:
After Each Use:
1. Turn on filtration system.
2. For each 250 gallons of water, add 2 ounces directly into spa water.
3. Run filtration system for 15 minutes with cover off.
4. Repeat process once a week to help maintain clear, odor-free water.

 

Tips:
The time to add Renew is after using the spa. Simply add the required dose, put the cover in place, and the water will be fresh, clean and ready for the next bather.

Compatible With:
Chlorine, bromine, ozone and mineral purifications systems, as well as part of the Reserve & Renew® System.